1.4313是馬氏體級，耐腐蝕性高，熱處理后耐久性好。X3CrNiMo13-4鋼的機械性能是由于化學成分中鉬和鎳的高含量。這些合金添加劑限制了增加a級碳含量的需要——給定濃度相當于奧氏體不銹鋼。雖然鎳含量不高，但鎳含量約為4%，顯著提高了鋼對各種腐蝕環境的抵抗力——二次機械性能。X3CrNiMo13-4鋼用戶可生產高達300℃在溫度下工作的零件和零件，以及暴露在各種腐蝕環境中的零件，同時保持足夠的表面條件括抗氯化物性質)。QT650.QT780和QT900條件下。半成品用于石油生產.化工.在冶金和能源行業，渦輪機暴露在高溫和低溫下.泵.壓縮機部件。鋼不適合焊接。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050

Si (％): ≤ 0.70

Mn (％):≤ 1.50

P (％)≤:0.040

S (％)≤:0.030

Cr (％): 12.0 ~ 14.0

Ni (％): 3.50~ 4.50

Mo (％):0.30 ~ 0.70

Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealed

Hardness HBS: 320

Tensile strength σb/MPa:1100

Thickness/≤mm: 60

Condition of thermal treatment: QT650

Yield strength σ0.2≥/MPa:520

Tensile strength σb/MPa:650~830

Elongation δ( longitudinal )≥(％):15

Impact absorbing power Akv≥/J| longitudinal:70

Thickness/≤mm: 60<d≤160

Condition of thermal treatment: QT650

Yield strength σ0.2≥/MPa:520

Tensile strength σb/MPa:650~830

Elongation δ(transversal)≥(％): 12

Impact absorbing power Akv≥/J|transversal: 50

Thickness/≤mm: ≤160

Condition of thermal treatment: QT780

Yield strength σ0.2≥/MPa:620

Tensile strength σb/MPa:780~980

Elongation δ( longitudinal )≥(％):15

Impact absorbing power Akv≥/J| longitudinal:70

Thickness/≤mm: ≤160

Condition of thermal treatment: QT900

Yield strength σ0.2≥/MPa:800

Tensile strength σb/MPa:900~1100

Elongation δ( longitudinal )≥(％):12

Impact absorbing power Akv≥/J| longitudinal:50

EN1.4313馬氏體不銹鋼具有退火特性（+A）狀態、淬火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900).