1.設置設備名稱及管理IP

筆記本連接圖中eth1網口，設置同一網段IP地址，通過ssh登錄，登錄信息如下：

IP：128.221.252.2

Username：service

Password：Mi@Dim7T

修改設備名稱

service@Management:Server:~>sudo /opt/emc/VPlex/tools/ipconfig/changehostname.py -n hostname

設置eth3管理IP

使用vplexcli模式登錄，

service@vplex01:~> vplexcli

Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
username: service password:

VPlexcli:/>

配置IP地址：

? 配置MMCS-A

VPlexcli:/> management-server set-ip -i IP_address/netmask -g gateway eth3

配置MMSC-B

VPlexcli:/> management-server set-ip -i IP_address/netmask -g gateway eth3 –-peer

查看已配置的IP地址

VPlexcli:/> ll /management-server/ports/eth3

Name Value
-------- -------------
address 10.243.48.65
gateway 10.243.48.1
net-mask 255.255.255.0

?

2.查看系統版本

連接本地控制器：

VPlexcli:/> configuration connect-local-directors -f???????????????????????????????????????????????????????????????????????????????????

Connected to Plex firmware director-1-1-A.

Connected to Plex firmware director-1-1-B.

確保所有本地主管都是連接的

VPlexcli:/> ll /engines/*/directors??????????? ?????????????????????????????????????????????????????????????????????????????????????????

?

/engines/engine-1-1/directors:

Name??????????? Director?? Cluster?? Commissioned? Operational?? Communication

--------------? ID???????? ID??????? ------------? Status??????? Status

--------------? ---------? --------? ------------? ------------? --------------

director-1-1-A? -1???????? -1??????? false???????? ok??????????? ok

director-1-1-B? -1???????? -1??????? false???????? ok??????????? ok

?

查看版本

VPlexcli:/> version –a

What Version
Info
-----------------------------------------------------------------------
Product Version 6.0.0.00.00.13
SMSv2 D40.0.0.395.0
Mgmt Server Base D40.0.0.165
Mgmt Server Software D40.0.0.428
/engines/engine-1-1/directors/director-1-1-B 7.1.409.0.0
/engines/engine-1-1/directors/director-1-1-A 7.1.409.0.0
/engines/engine-1-2/directors/director-1-2-A 7.1.409.0.0
/engines/engine-1-2/directors/director-1-2-B 7.1.409.0.0

3.查看健康狀態

退出vplexcli

VPlexcli:/>exit

執行健康檢查命令：

service@vplex01:~> VPlexPlatformHealthCheck

System Information

------------------

single engine(small config)system detected

Management Server IP Connectivity Check

---------------------------------------

IP interfaces : OK

IP Connectivity to Directors Check : OK

Local-com IB Connectivity Check

-------------------------------

IB Director Connectivity Check : OK

Engine configuration Check

--------------------------

TLA property Check : OK

Management Server System Check

------------------------------

Process Check : OK

Check Partitions : OK

CPU Check : OK

Configuration Files Presence Check : OK

Director (engine-1-1 director 1A 128.221.252.35) Health Check

-------------------------------------------------------------

running on a unconfigured system

Process Check: OK

CPU Check: OK

SSD /dev/sda Check: OK

RPM Check: OK

flashDir Check: OK

WWN Seed Check: OK

Health Check: OK

Hardware Module Check: OK

Director (engine-1-1 director 1B 128.221.252.36) Health Check

-------------------------------------------------------------

running on a unconfigured system

Process Check: OK

CPU Check: OK

SSD /dev/sda Check: OK

RPM Check: OK

flashDir Check: OK

WWN Seed Check: OK

Health Check: OK

Hardware Module Check: OK

Platform Health Check Passed

4.配置NTP服務器（可選）

配置NTP服務器：

configuration sync-time -f -i IP_address_of_remote_NTP_server

?

VPlexcli:/> configuration sync-time -f -i 192.188.51.1?????????????????????????????????????????????????????????????????????????????????

Synchronize Time task completed.

5.啟動EZ-Setup向?qū)?/h1>

輸入命令，啟動EZ-Setup向?qū)?/p>

VPlexcli:/> configuration system-setup

?

Verifying the pre-requisites for EZ-Setup...

Info: Able to contact director-1-1-A at 128.221.252.35.

Info: Able to contact director-1-1-B at 128.221.252.36.

Verification of the pre-requisites for EZ-Setup successful

Initializing CST...

CST initialization complete

? Welcome to the VPLEX EZ-Setup Wizard

? The Setup Wizard collects information about your configuration and uses it to set up

? your VPLEX implementation. Type exit at any prompt to stop. Your answers

? will be saved so you can restart the process if needed.

? Before starting, please read the VPLEX Installation and Setup Guide and the Release

? Notes.

? Continue? (yes/no) [yes]:??????? //輸入yes或直接回車默認yes

?

Select a Configuration Option

? What would you like to configure?

? 1.??? Configure a VPLEX Local (single cluster).

? 2.??? Configure a VPLEX Metro (synchronous, 2 clusters).

? Select your configuration choice. (1-2): 1?? //選擇2，配置Local??????????????????????????????????????????????????????????????????????????????????

?

? You have selected to configure the only cluster of a VPLEX Local. If you want to

? configure a VPLEX Metro, please select option 2

? Are you sure you want to configure a VPLEX Local? (yes/no): yes??? //確定 配置LOCAL模式

??????????????????????????????????? ???????????????????????????????

? Customize Login Banner (Optional)

? This VPLEX cluster can be configured to display a customized login banner. To

? configure this, you need to provide the login banner text file.

? Or, you may choose not to configure the login banner at this time. You may configure

? it at any time, using 'security set-login-banner' VPLEX CLI command.

? Would you like to configure the login banner? (yes/no)? [no]:?????????? //no,不配置橫幅?????????????????????????????????????????????????????????????

?

? Configure Authentication Service Provider (Optional)

? You may select to use your existing LDAP or Active Directory as a directory service to

? authenticate VPLEX users. To configure this, you will need the authentication service

? provider server information, and the security information to map the users.

? Or, you may choose not to configure an authentication service provider at this time.

? You may configure an authentication service provider for authentication at any time,

? using VPLEX CLI commands.

? users? (yes/no) [no]:???????????????????? //no，不配置認證服務提供商???????????????????????????????????????????????????????????????????????????????????

? Would you like to configure an authentication service provider to authenticate VPLEX

? Select EMC Notification Options

? By configuring EMC Event Notifications, EMC will be able to better serve you.

? [yes]: no?????????????? //no，不配置身份驗證服務提供商

?????????????????????????????????????????????????????????????????????????????????????????????????????????????

? Would you like to configure this cluster to send event notifications to EMC? (yes/no)? //事件通知發送給EMC

?

? Configure SNMP to Collect Performance Statistics

? The system can be configured to collect VPLEX performance statistics via the SNMP

? protocol. Statistics such as I/O operations and latencies as well as director memory

? statistics can be collected by issuing SNMP GET, GET-NEXT or GET-BULK messages to the

? SNMP agent. Additional details on the values collected can be found in the VPLEX

? Installation and Setup Guide.

? Before you get started you will need the community string for SNMP GET,GET-NEXT and

? GET-BULK messages. The default authorization level is read-only.

? Would you like to configure the cluster to run the SNMP Agent Service? (yes/no) [no]:???????? //no，不配置SNMP???????????????????????????????????????

?

? Specify Certificate Configuration

? A Certificate Authority is needed to create a digital Host Certificate for the

? management server. For security reasons, this certificate must expire in 5 years or

? less. For more information, see the VPLEX Security Configuration Guide.

? A Host Certificate will be created to configure the web server. It also secures

? communication between management servers for VPLEX Geo configurations. For security

? reasons, this certificate must expire in 2 years or less. For more information, see

? the VPLEX Security configuration Guide.

? In addition to specifying certificate expirations, you will need to create certificate

? passphrases. These passphrases will be needed later in the setup process, so please

? make a note of it.

?

? Do you want to import host certificates? (yes/no). [no]:???????? //no，不導入證書，生成證書????????????????????????????????????????????????????????????

????????????????????????????????????? ???????????????????????????????

? 5 years (maximum is 5 years). [5]: 5?????????? //5，確定CA證書最長年限??????????????????????????????????????????????????????????????????????????????????????

? How many years should the CA certificate remain valid before expiring? EMC recommends

? recommends 2 years (maximum is 2 years). [2]:?????? //2，確定主機證書最長年限，?????????????????????????????????????????????????????????????????????????????????

? How many years should the host certificate remain valid before expiring? EMC

?

? Do you want to import web certificates? (yes/no). [no]:????? //no，不導入web認證????????????????????????????????????????????????????????????????????????

?

Certificates configuration information is saved.

? Review and Finish

? Review the configuration information below. If correct, enter yes (or simply

? accept the default and press Enter) to start the setup process. If the

? values are not correct, enter no to go back and make changes or to exit the

? setup.

??? Cluster Information

????? This is the only cluster in a VPLEX Local.

??? Login Banner Information

????? The Login Banner will not be configured.

??? Authentication Service Provider Information

????? An Authentication Service Provider will not be configured on this cluster.

??? Performance Statistics

????? The performance statistics will not be configured.

??? Security Certificate Information

????? The Certificate Authority will expire in 5 years.

????? The Host Certificate will expire in 2 years.

? Would you like to run the setup process now? (yes/no): yes????????????????? //輸入yes，確認配置?????????????????????????? ???????????????????????????????

?

Checking if the default password is in use...

Changing password for user admin???? //修改admin用戶密碼

Please enter the old password:????? //輸入admin用戶舊密碼：teS6nAX2????????????????????????????????? ??????????????????????????????????????????????????????

Please enter the new password:????? //輸入admin用戶新密碼??????????????????????????????????????????????????????????????????????????????????????????

Please reenter the new password:???? //再次輸入admin用戶新密碼????? ??????????????????????????????????????????????????????????????????????????????????????

Successfully completed password????????????????? change for admin.???? //成功修改admin用戶密碼

Changing password for user service??? //修改service用戶密碼

Please enter the old password:???????? //輸入service用戶舊密碼：Mi@Dim7T???????????????????????????????????????????????????????????????????????????????????????

Please enter the new password:???????? //輸入service用戶新密碼??????????????????????????????????????????????????????????????????????????? ?????????????

Please reenter the new password:?????? //再次輸入service用戶新密碼?????????????????????????????????????????????????????????????????????????????????????????

Successfully completed password????????????????? change for service.??? //成功修改service密碼

**************************************************************************************************?????????????????????????????????????????????????????????????????????????????????????????????????? ???????????????????????????????

?????????????????????????????? NOTICE

???? To ensure the highest levels of support, notify EMC support of any service password changes.

**************************************************************************************************

Setting up environment for certificate creation...

Certificate creation started

Directors are connected...??????? //開始創建證書

?

host cert and key certificate import paths were not provided.// 主機證書和密鑰證書導入路徑?jīng)]有提供。

Default self-signed host certificates will be generated.// 將生成默認的自簽名主機證書。

web cert and key certificate import paths were not provided.// 網站的證書和密鑰證書導入路徑?jīng)]有提供。

Default self-signed web certificates will be generated.// 將生成默認的自簽名Web證書。

?

?to configure a second cluster of a VPLEX Metro or Geo.

?Certificate Authority passphrase:???????????? //為配置Metro預留的第二個集群配置認證權威秘鑰 ???Mi@Dim7TD???????? ???????????????????????????????????????????????????????????

Re-enter the passphrase for the Certificate Authority Key:?????????????????????????????????????????????????????????????????????????????

New CA certificate /etc/ipsec.d/cacerts/strongswanCert.pem created

New CA key /etc/ipsec.d/private/strongswanKey.pem created

?

his passphrase as you will need it later.

Host Certificate passphrase:??????????????????? //主機認證秘鑰 ??Mi@Dim7TD??????????? ???????????????????????????????

Re-enter:??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

New Host certificate request /etc/ipsec.d/reqs/hostCertReq.pem created

New Host certificate /etc/ipsec.d/certs/hostCert.pem created and signed by the CA Certificate /etc/ipsec.d/cacerts/strongswanCert.pem

?

?of this passphrase as you will need it later.

Web Host Certificate passphrase:?????????????? //web主機認證秘鑰 Mi@Dim7TD????????? ???????????????????????????????

Re-enter:??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

New Host certificate request /etc/ipsec.d/reqs/webServerHostCertReq.pem created

nCert.pem

?

addWebapp(/smsflex,/opt/emc/VPlex/tomcat/webapps/smsflex)

addWebapp(/cimom,/opt/emc/VPlex/tomcat/webapps/cimom)

addWebapp(/,/opt/emc/VPlex/tomcat/webapps/ROOT)

addWebapp(/vplex,/opt/emc/VPlex/tomcat/webapps/vplex)

SSL protocols enabled for Server: TLSv1,TLSv1.1,TLSv1.2,SSLv2Hello

SSL protocols enabled for Client: TLSv1,TLSv1.1,TLSv1.2

https keystore: /var/log/VPlex/cli/.keystore

started web server on ports {'http': 49880, 'https': 49881}

?

Local Configuration of certificates completed successfully? //已成功完成證書的本地配置

Validating that the Certificate Authority and the Host Certificates have been created... //驗證已創建證書頒發機構和主機證書…

Certificate creation is completed successfully? //證書創建成功完成。

?

Setting up environment for EMA Adaptor Configuration...

Directors are connected

EMA adaptor configuration started...

Verifying that all the pre-conditions for configuring the EMA adaptor are satisfied...

Verifying that the EMA adaptor file is present.

Verifying that the Cluster TLA is set.

Verification of the pre-conditions for the run complete.

Configuring EMA adaptor...

EMA adaptor configuration is completed successfully

?

Setting up environment for Call Home Connection Configuration...

Notification configuration started.

Verifying that all the pre-conditions for configuring the notification connection(s) are satisfied.

Verifying that the Call Home configuration file is present.

Verification of the pre-conditions for the run complete.

Configuring notification connection records.

SYR data collection job scheduled

Configuring notification connection records is completed successfully.

?

setup : disconnecting from all directors

Disconnected from remote systems director-1-1-A, director-1-1-B.

Running the basic setup task

Verifying that the system is configured properly...

Connecting to all the directors and validating them...

Connected to Plex firmware director-1-1-A.

Connected to Plex firmware director-1-1-B.

?

Setting the cluster id on the directors and validating them...

Successfully updated 'cluster-id' for Director: director-1-1-A.

Successfully updated 'cluster-id' for Director: director-1-1-B.

Setting the director count and validating it...

Successfully updated 'director-count' for Director: director-1-1-A.

Successfully updated 'director-count' for Director: director-1-1-B.

Restarting GeoSynchrony software on all directors...

This may take a few moments...

?

For /engines/engine-1-1/directors/director-1-1-B:

Status??? Description

--------? -----------

Started.?

For /engines/engine-1-1/directors/director-1-1-A:

Status?? ?Description

--------? -----------

Started.?

Waiting for firmware to start...

..

Waiting for firmware run level to initialize...

Commissioning all the directors...

This may take a few moments...

Enabling COM and back-end ports...

Validating the health status of the directors...

This may take a few moments...

Setting the director product revision.

Basic setup task is completed successfully.

?

Running the UpdateCallHomePropertiesTask setup task

??? Configuration Complete!

?

? The Setup Wizard has completed the automated portion of configuring your cluster. From

? this point, please follow the manual procedures defined in the Installation and Setup

? Guide.

?

6.查看端口WWN

輸入命令，查看后端端口是否已激活，若激活可查看WWN

VPlexcli:/> ll /engines/**/ports???????????????????????????????????????????????????????????????????????????????????????????????????????

?

/engines/engine-1-1/directors/director-1-1-A/hardware/ports:

Name???? Address???? ????????Role?????? Port Status

-------? ------------------? ---------? -----------

A-ETH02? 0.0.0.0|??????????? -????????? down

A0-FC00? 0x0000000000000000? front-end? down

A0-FC01? 0x0000000000000000? front-end? down

A0-FC02? 0x0000000000000000? front-end? down

A0-FC03? 0x0000000000000000? front-end? down

A1-FC00? 0xc00144878fc70800? back-end?? up

A1-FC01? 0xc00144878fc70900? back-end?? up

A1-FC02? 0xc00144878fc70a00? back-end?? up

A1-FC03? 0xc00144878fc70b00? back-end?? up

A3-IB00? 0x604800000becb0??? local-com? up

A3-IB01? 0x604800000becb8??? local-com? up

/engines/engine-1-1/directors/director-1-1-B/hardware/ports:

Name???? Address???????????? Role?????? Port Status

-------? ------------------? ---------? -----------

B-ETH02? 0.0.0.0|??????????? -????? ????down

B0-FC00? 0x0000000000000000? front-end? down

B0-FC01? 0x0000000000000000? front-end? down

B0-FC02? 0x0000000000000000? front-end? down

B0-FC03? 0x0000000000000000? front-end? down

B1-FC00? 0xc00144878fc78800? back-end?? up

B1-FC01? 0xc00144878fc78900? back-end?? up

B1-FC02? 0xc00144878fc78a00? back-end?? up

B1-FC03? 0xc00144878fc78b00? back-end?? up

B3-IB00? 0x604800000bf3d0??? local-com? up

B3-IB01? 0x604800000bf3d8??? local-com? up

?

7.從存儲準備LUN

連接后端存儲，在存儲上注冊VPLEX，并準備元卷和備份卷，分別為

VPLEX01_MetaLUN_00、VPLEX01_MetaLUN_01、

VPLEX01_MetaLUN_00_backup、VPLEX01_MetaLUN_01_backup、

將MetaLUN、MetaLUN_backup映射給vplex01。

PS：每個卷必須大于78G

?

8繼續EZ-Setup

VPlexcli:/> configuration continue-system-setup

這部分的EZ安裝完成后重新發現后端陣列。等到發現就繼續進行下一個任務。

如果需要重置EZ安裝程序，則通過執行configuration system-reset命令恢復它。

9.必要時重新啟動Web服務器

webserver stop
webserver start

10.創建元卷

連接后端存儲，在存儲上注冊VPLEX，并準備元卷和備份卷，分別為MetaLUN_00、MetaLUN_01、MetaLUN_00_backup、MetaLUN_01_backup，將其映射給vplex。

PS：每個卷必須大于78G

?

顯示可用于元卷的已映射的LUN

VPlexcli:/> configuration show-meta-volume-candidates? ?????????????????????????????????????????????????????????????????????????????????

Name????????????????????????????????????? Capacity? Vendor??? IO Status? Type???????? Array Name

----------------------------------------? --------? --------? ---------? -----------? ---------------------------

VPD83T3:600601606da038003409a6c74d27e811? 100G????? DGC?????? alive????? traditional? EMC-CLARiiON-FCN00141100055

VPD83T3:600601606da03800b41233ed4d27e811? 100G????? DGC?????? alive????? traditional? EMC-CLARiiON-FCN00141100055

VPD83T3:600601607c003500e008c9844e27e811? 100G????? DGC?????? alive????? traditional? EMC-CLARiiON-CKM00132000216

VPD83T3:600601607c003500e6b3495d4e27e811? 100G????? DGC?????? alive????? traditional? EMC-CLARiiON-CKM00132000216

從存儲上查看對應LUN的UUID，選擇并創建元卷

VPlexcli:/> meta-volume create -n c1_MetaLUN -d VPD83T3:600601607c003500e6b3495d4e27e811,VPD83T3:600601606da038003409a6c74d27e811??????

This may take a few minutes...

Meta-volume c1_MetaLUN is created at /clusters/cluster-1/system-volumes.? //元卷已創建

?

查看已創建的元卷

VPlexcli:/> ll /clusters/cluster-1/system-volumes/?????????????????????????????????????????????????????? ???????????????????????????????

/clusters/cluster-1/system-volumes:

Name??????? Volume Type? Operational? Health? Active? Ready? Geometry? Component? Block???? Block? Capacity? Slots

----------? -----------? Status?????? State?? ------? -----? --------? Count????? Count???? Size?? --------? -----

----------? -----------? -----------? ------? ------? -----? --------? ---------? --------? ----- ?--------? -----

c1_MetaLUN? meta-volume? ok?????????? ok????? true??? true?? raid-1??? 2????????? 26214144? 4K???? 100G????? 64000

查看集群狀態

VPlexcli:/> cluster status??????????????????????????????????????????????????????????????????????????????????????????????????????

Cluster cluster-1

? ??????? operational-status:??????????? ok

?? ?????? transitioning-indications:????

???? ???? transitioning-progress:?? ?????

???? ???? health-state:?????????????? ?????ok

???? ???? health-indications:???????????

???? ???? local-com:?????????????????? ?????ok

11.配置備份卷

VPlexcli:/> configuration metadata-backup

? Configuring Meta-data Backups

? To configure meta-data backups you will need to select two unclaimed volumes (78G or

? greater), preferably on two different arrays. Backups will occur automatically each

? day, at a time you specify. Please note: All times are UTC and are not based on the

? local time.

? Available Volumes for Meta-data Backup

Name????????????????????????????????????? Capacity? Vendor??? IO Status? Type???????? Array Name

----------------------------------------? --------? --------? ---------? -----------? ---------------------------

VPD83T3:600601600230410036b905632fe7e711? 100G????? DGC?????? alive????? traditional? EMC-CLARiiON-CETV2162500035

VPD83T3:6006016038a03000449dda7630e7e711? 100G????? DGC?????? alive????? traditional? EMC-CLARiiON-CKM00121200040

：

5632fe7e711,VPD83T3:6006016038a03000449dda7630e7e711?????????????? ??????????????????????????????????????????????????????????????

? What hour of the day (UTC) should the meta-data be backed up? (0..23): 23?????????? //設置備份時間（小時）??????????? ???????????????????????????????

? What minute of the hour should the meta-data be backed up? (0..59): 30?????????????? //設置備份時間（分鐘）?????????? ???????????????????????????????

? VPLEX is configured to back up meta-data every day at 23:30 (UTC).

? Would you like to change the time the meta-data is backed up? [no]:??????? //是否改變備份時間？???????????????????????????????????????????????????

? You have chosen to configure the backup of the meta-data. Please note: All times are

? UTC and are not based on the local time.

? Review and Finish?????? //審核完成

? Review the configuration information below. If the values are correct, enter

? yes (or simply accept the default and press Enter) to start the

? setup process. If the values are not correct, enter no to go back and make

? changes or to exit the setup.

??? Meta-data Backups

????? Meta-data will be backed up every day at 23:30.

????? The following volumes will be used for the backup

????? :VPD83T3:600601600230410036b905632fe7e711,VPD83T3:6006016038a03000449dda7630e7e711

? Would you like to run the setup process now? [yes]: yes??????? //確定現在配置備份卷yes???????????????????????????????????????????????????????????????

Scheduling the backup of metadata...

Performing metadata backup (This will take a few minutes)

Successfully performed the initial backing up of metadata

Successfully scheduled the backing up of metadata

Successfully scheduled the metadata backup

The metadata backup has been successfully scheduled.????? //配置完成

12.完成EZ-Setup

VPlexcli:/> configuration complete-system-setup

Initializing perpetual monitors on local directors.

This will take a few moments...

11.注冊集群

輸入命令注冊集群

VPlexcli:/> configuration register-product

mail to send to EMC.

Attempting to determine the VPLEX Product Serial Number from the system.

Company Site ID Number (Optional) : 12345???? //公司網站ID號(可選):??????????????????? ???????????????????????????????????????????????????????????????

Company Name : TOYOTA?????? //公司名稱????????????????????????????????????????????????????????????????????????????????????????????????????

Contact First Name : Zhang????????? //聯系人名字???????????? ?????????????????????????????????????????????????????????????????????????????

Contact Last Name : Yang???????? //聯系人姓氏???????????????????????????????????????????????????????????????????????????????????????????????

Contact Email Address : customer.one@company.com???????? //聯系人電子郵箱???????????????????????????????????????????????????????????????????????

Contact Phone Number : 888-555-1212?????????????????????????????????????????????????????????????????????????????????????????????

Company Street Address : Jintaixilu???????? //公司街道地址????????????????????????????????????????????????????????????????????????????????????

Company City : Beijing?????????????? //公司城市???????????????????????????????????????????????????????????????????????????????????????????

Company State or Province : Beijing?????????? //公司省份??????????????????????????????????????????????????????????????????????????????????

Company Zip or Postal Code : 01748??????????? //公司郵編????????????????????????????????????????????????????????????????????????????? ?????

Company Country : China?????????? //公司國家??????????????????????????????????????????????????????????????????????????????????????????????

Which method will be used to send Event Notifications?

?Enter the number associated with your selection.

? 1: ESRS

? 2: Email

? 3: None (Event Notifications are not configured)

Event Notifications using : 3????? //選擇哪種方式來發送通知???????????????????????????????????????????

?

Which method will be used for Remote Support?

?Enter the number associated with your selection.

? 1: ESRS

? 2: WebEx?

2????? //選擇哪種方式用來遠程支持?

?

Please review your product registration information below. ??//確認信息

VPLEX Product Serial Number : CKM00174001784

GeoSynchrony version : 6.0.1.00.00.08

Company Site ID # : 12345

Company Name : TOYOTA

First Name : Zhang

Last Name : Yang

Business Email Address : customer.one@company.com

Business Phone Number : 888-555-1212

Business Address : Jintaixilu

City : Beijing

State/Province : Beijing

Zip/Postal Code : 01748

Country : China

Event Notifications Using : None (Event Notifications are not configured)

Remote Support Using : WebEx

Would you like to continue with these values? (Y/N): y????????? //確定以上信息????????????????????????????????????????????????????????????????

?

Attempting to call home the product registration

MC for you using an SMTP server of your choice.? Would you like to send this now?? (Y/N): n?????? //用SNMP嗎？?????????????????????????? ????

To complete the registration process, this information must be sent to EMC.

om as soon as possible to complete your VPLEX registration.

12.啟用前端端口

輸入命令啟用前端端口

VPlexcli:/> configuration enable-front-end-ports????????????????????????????????????????????? ???????????????????????????????????

Verifying if the FE Ports are enabled

Running the enableFEPortTask setup task

Verifying if the FE Ports are enabled

Enable FE Ports task completed.

The Front End Ports for this cluster are now enabled.?? //前端端口已啟用

查看前端端口WWN

VPlexcli:/> ll /engines/**/ports???????????????????????????????????????????????????????????????????????????????????????????????????????

?

/engines/engine-1-1/directors/director-1-1-A/hardware/ports:

Name???? Address???????????? Role?????? Port Status

-------? ------------------? ---------? -----------

A-ETH02? 0.0.0.0|??????????? -????????? down

A0-FC00? 0xc00144878fc70000? front-end? up

A0-FC01? 0xc00144878fc70100? front-end? up

A0-FC02? 0xc00144878fc70200? front-end? up

A0-FC03? 0xc00144878fc70300? front-end? up

A1-FC00? 0xc00144878fc70800? back-end?? up

A1-FC01? 0xc00144878fc70900? back-end?? up

A1-FC02? 0xc00144878fc70a00? back-end?? up

A1-FC03? 0xc00144878fc70b00? back-end?? up

A3-IB00? 0x604800000becb0??? local-com? up

A3-IB01? 0x604800000becb8??? local-com? up

?

?

/engines/engine-1-1/directors/director-1-1-B/hardware/ports:

Name???? Address???????????? Role?????? Port Status

-------? ------------------? ---------? -----------

B-ETH02? 0.0.0.0|??????????? -????????? down

B0-FC00? 0xc00144878fc78000? front-end? up

B0-FC01? 0xc00144878fc78100? front-end? up

B0-FC02? 0xc00144878fc78200? front-end? up

B0-FC03? 0xc00144878fc78300? front-end? up

B1-FC00? 0xc00144878fc78800? back-end?? up

B1-FC01? 0xc00144878fc78900? back-end?? up

B1-FC02? 0xc00144878fc78a00? back-end?? up

B1-FC03? 0xc00144878fc78b00? back-end?? up

B3-IB00? 0x604800000bf3d0??? local-com? up

B3-IB01? 0x604800000bf3d8??? local-com? up